Find Cold Applied PP Fiber Woven Tape, PP Fiber Woven Tape For Weld Joints, PP Fiber Adhesive Tape on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Anticorrosion Pipe Wrap Tape > PP Woven Fiber Wrap Tape > Cold applied PP fiber woven tape for weld joints bends fittings

Cold applied PP fiber woven tape for weld joints bends fittings

Basic Info

Model No.: T500

Product Description

Cold applied PP fiber woven tape for weld joints bends fittings ( T500)

1. System description:

The XUNDA-T 500 series is cold applied tape for both metallic pipelines and waterproofing works against outdoor bad weathers .

The PP fiber woven tape shall be applied after the Liquid adhesive by hand or with a wrapping machine.

Waterproofing-

Pipelines protection

-Waterproofing membrane for basements,substructures and flat deck applications. plazas, bridge, vehicular traffic structures, or parking decks overlaid with an asphalt concrete wearing course.

-Tough, high performance waterproof membrane for critical substructures and civil engineering works.

-Provides a vapor and waterproof membrane to water excluding structures and protects concrete from attack by aggressive ground salts.

-Protection for wall ,floor, roof, corner, basement etc. to against from attack by bad weather, rain, acid alkaline salt

_ Weld joints

_ Bends

_ Fittings

_ Bare pipe lengths

_ Pipe rehab and repair

-Bare pipe length

2. Structures

The specification of the tape consists of three layers,

Adhesive layer: Butyl rubber Bituminous Compound

Backing : PP Woven Fabric cloth

Interleaf: Antiadhesive Film Treated with Silicone

3. Features

Waterproofing-

Pipes protection

-Cold applied.

-High resistance to bad weather environment

-Good performance itself to keep dry

-Easily application &installation.

-Suitable for a wide range of temperatures

- Compatible primers

-Safe,clean

_ Cold applied

_ Excellent self adhesion to pipe

_ Flexibility provides extra protection at vulnerable areas

_ Excellent conformability and consistent uniform thickness

_ Easily applied with no special equipment

_ Compatible with common pipe coatings

_ Excellent resistance to cathodicdisbonding

_Wider service temperature range

4. Physical Properties

Polypropylene Mesh Membrane Tapes XUNDA-T 500 Series

Item

T 5100

T 5130

T 5150

T 5165

Total thickness (mil)

40mils

50mils

60mils

65mils

Tensile Strength (lb/in)

30(5kg/cm)

35(6.3kg/cm)

39(7kg/cm)

42(7.5kg/cm)

Elongation (%)

400

400

450

500

Length

25mtrs

20mtrs

15mtrs

10mtrs

Width

2[,4",6",9"

Peeladhesion To primed pipe (oz/in)

269(3kg/cm)

296(3.3kg/cm)

314 (3.5kg/cm)

340(3.8kg/cm)

To backing (oz/in)

90(1kg/cm)

90(1kg/cm)

117(1.3kg/cm)

135(1.5kg/cm)

Dielectric Strength (KV/mm)

42

42.6

43

43.8

Volume Resistivity (ohm·m)

2.5 X 1012

2.5 X 1012

2.5 X 1012

2.5 X 1012

Water Vapor Transmission Rate (g/ m2/24h)

0.06

0.05

0.03

0.02

Water Absorptivity (%)

0.1

0.1

0.1

0.1

Application Temperature (°F)

-31-+160 (-35-+70℃)

Max service temperature (°F)

-40-+250 (-40-+121℃)


HTB1ZGleHpXXXXbIapXXq6xXFXXXH

HTB1oDzAHpXXXXauXpXXq6xXFXXXK

HTB1p1DCHpXXXXaUXXXXq6xXFXXXW


1

Contact us if you need more details on Cold Applied PP Fiber Woven Tape. We are ready to answer your questions on packaging, logistics, certification or any other aspects about PP Fiber Woven Tape for Weld Joints、PP Fiber Adhesive Tape. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Anticorrosion Pipe Wrap Tape > PP Woven Fiber Wrap Tape